Quietly & without making any undue “song & dance” about it, our Rocketbearings have been slowly taking over the world of Tournament Casting & long range fishing.

Amongst many other notable results in 2008, we would especially like to offer our congratulations to our new ICSF World Record holder Colin Howlett & also to the French Team on their victory at the CIPS Casting Championships. If you can’t beat them, perhaps you may care to join them!

Manufactured to our precise specifications they carry the International ABEC 7 rating, are manufactured DRY, and are stamped on the outside of the cages CB.

Any higher ABEC rating is in our opinion counter productive as too tight a tolerance doesn’t permit our lubricants to function properly.

Simply replace the existing Steel Bearings with TG’s Rocket Bearings and treat them in exactly the same manner as the old Steel Bearings. The only difference is the sound, speed and overall performance achieved when casting using TG'S Rocket Bearings.

DAIWA

DAIWA 7HT (1 @ 4x11x4 & 1 @ 6x13x5)
DAIWA 7HT TURBO (1 @ 4x11x4 & 1@ 5x11x4)
DAIWA 7HT MAG (1 @ 3x10x4 & 1 @ 5x11x4)
DAIWA PIXY /ALPHAS ETC (1 @ 3x8x4 & 1 @ 5x11x4)

ABU

All of the folllowing reels with outboard bearings located in the end caps made before 1981 require the same size bearings (3.2(1/8") x 10 x 4)

5000 - 5000C - 5000D - 500DL - 6000 - 6000C - 7000 - 7000C

All of the following reels with outboard bearings located in the end caps made after 1981 require the same size bearings (3x10x4)

4500C – 4500CB – 4600AL – 4600CB – 5000C – 5600 – 5000CDL – 5001C – 5500C – 5500CA –
5500D 5500DA – 5500ST – 5600A – 5600AL – 5600C – 5600CA – 5600CDL6000C – 6500 – 6500C 6500A – 6500CA – 6500CA – 6500CT – 500ST – 6600C – 7000 – 7000C – 7500C – 7500CT – MAG I – MAG 2 – 321 – 322 – 521 – 522 – XLT1 – XLT2 – U MAG 1 – U MAG II – 1021 – 1022 – 821 – 822 – PROMAX 1600

All of the following reels with inboard bearings located in the spool require the same size bearings (4x9x4).

MAG III – U MAG III – XLT3 – 323 – 523 – 823

All of the following reels with inboard bearings located in the spool require the same size bearings (4x10x4).

4500 – 5500 – 6500 – 4600 – 5600 – 6600 AB models – 6500CT (from 1990) – ALL ROCKETS, ELITES & SPECIALS – MAG ELITES – SPORTS MAG – BLACK MAX – PRO MAX – 6600 – 6600W – 6500CTM – 6500 MILLENIUM – 6500C3 – 6500C4 – 5500 – 4500 – 6600 – 5600 – 4600 – 6501C – ULTRACAST – 5501C – 6501C4 – 4600C4 MAG – 4600C4 – WINCH – 5600C4 – 5600C4 MAG – 5500 PROSHOP – 5600 PROSHOP – ALSO SOME LATER MAG III models

Other popular ABU reel models

ABU 2500 (5x11x4)
ABU REVO (1 @ 3X10X4 & 1 @ 5X11X4)
 

Shimano

CALCUTTA (All models except CT-50/51 cast cap)
CALCUTTA TE (All models)
CARDIFF (All models)
CURADO & CURADO BSF (All models)
CASTAIC & CASTAIC SF(All models)
CITICA (All models)
CHRONARC (All models)
CHRONARCH SF (All models)
SPEEDMASTER IICFS (All models)
 

Penn

525 MAG/T